Aegis AEGIS 1000 Instrukcja Właściciela

AEGIS 1000 Owner’s Manual Part No. AEG1000-OMAN Document Number 21R00-14 Re

6 SECURITY SYSTEM OPERATION Disarming the Security System and Silencing Alarms Before going any further, you should know how to disarm your security

7 2 = NIGHT The NIGHT mode is used when you are asleep and everyone in your household is at home. In the Night mode, your doors, windows, and non-sl

8 Quick Arm For extra convenience, the Aegis 1000 can be armed by simply pressing the DAY, NIGHT, or AWAY button twice, eliminating the need to enter

9 What To Do When You Come Home Entry through a door: If you enter your home while the system is armed in the Day or Away modes, using your normal e

10 Fire Alarm Activated When the fire alarm is activated by the smoke/fire detector(s), the alarm responds exactly as described under Burglar Alarm A

11 Police Emergency When the 1 key and the 3 keys are pressed simultaneously, the Police Emergency alarm is activated. This alarm operates exactly t

12 Trouble Indications The Aegis 1000 constantly monitors the alarm zones and several internal matters and will alert you if it detects trouble. The

13 Manager Code The Manager codes can arm/disarm the security system during assigned times. The Manager code can access functions that are code prot

14 CONTROL The control features of the Aegis 1000 make it easy and convenient to control almost any light or appliance from the console or over the t

15 Unit Numbers Each module has its own Unit Number. Any unit number that is not being used for an ALC Switch Module may be used for an X-10 Module.

Copyright © 2002 HAI All Rights Reserved Home Systems Plus www.aegishome.com

If the House Code is configured to use the Compose Format, the second page of the menu is modified to allow Scene commands. ved from the menu. En

17 The rate specifies the time it takes the switch to go from full off to full on, or from full on to full off. Thus a level change from full off to

18 Before any digits are entered, the ' # ' key may be used to switch between specifying the rate in minutes, seconds, and hours. After you

19 Internal Flags A Flag is an internal setting (think of it as a virtual switch – it can be turned on and off) used to conditionalize a program (bas

20 Leviton Scene Control Aegis 1000 supports Leviton Scene Control (a feature found in certain Leviton Switches. There are 16 Scenes that can be set

Scene Off Command Once the Scenes have been sent, press the 0 (OFF) key to command the four units in t When sending Scene Commands, the controll

22 Aegis Thermostats and the Programmable Energy Saver Module (PESM) provides energy savings, comfort, and convenience by setting the HVAC system(s) t

To change a temperature setting, press 2 (HEAT), 3 (COOL), or 2 (TEMP) as appropriate: Upstairs HEAT ENTER TEMPERATURE: Upstairs COOL

24 Programmable Energy Saver Modules (PESMs) The PESM is used when you are have a thermostat, other than an Aegis Communicating Thermostat, and would

25 For Programmable Energy Saver Modules: Upstairs 0=OFF 1=ON 2=HEAT ↓ Upstairs 3=COOL 4=TIME #=STAT ↑ For temperature s

i Contents INTRODUCTION ...1 Underwriter's Laboratories (UL) Listing ...1 OVERALL

26 When the alarm is initiated, the console beeper will be turned on and an alarm dial-out sequence will be initiated after the normal dial-out delay.

27 You may enter a unit number to start displaying the status of that unit, or simply press the down arrow key to scroll through the list of units. T

28 Next, the display shows the A/D reading for the battery voltage, phone line voltage, AC power on, bell, and fuse: BAT: 225 PHONE: 140 ACO

29 Event Log The Event Log records the 50 most recent significant security system Events (happenings) and trouble conditions in the system. When a n

30 Messages The Message menu is used to show, log, clear, and send text messages and say and phone voice messages. To enter the Message menu, from t

31 Phone Message The 5 (PHONE) key allows the controller to call the selected phone number and say the selected voice message. PHONE NUMBER:

32 AEGIS PRO-LINK MODIFICATIONS The Pro-Link serial protocol in Aegis 1000 systems has been enhanced by the inclusion of built-in support for Aegis S

33 TELEPHONE CONTROL Telephone Interface Your Aegis 1000 is equipped with a built-in telephone response feature that allows you to control and acces

34 Phone Access Denied - Remote Lockout The Aegis 1000 has a remote lockout feature to discourage youngsters (and adults who act that way) from tryi

35 When you are finished with the voice menu, press the 9 (Good-Bye) key. The Aegis 1000 will say, "GOOD-BYE" and hang up. From an in-hous

ii TELEPHONE CONTROL ...33 Telephone Interface... 33 In-House Phones...

36 Emergency Dial-Out Emergency dial out consists of two distinct parts: the "digital dialer" and the "voice dialer." Digital D

37 If the number dialed is busy, or if all lines are busy, the dialer will immediately hang up and go to the next number in the Dial Order. The diale

38 SETUP The Setup menu is used to configure operating parameters, program your system to do its automated control and security functions, and give d

39 The times and days are changed by pressing the ' # ' KEY. Choose the 1 (TIME) key to change the On or Off times. You will be prompted t

40 Each automation "program" is a single step in programming automation in an Aegis 1000 system. Each program must specify when that progra

41 If there are no programs for the specified item, the console will beep three times and will display: *** NO PROGRAMS *** Otherwise, a help scr

42 • Selecting 3 (&COND) allows a condition to be specified that must be true for the program to be executed at the specified time. Each of these

43 DAY(S): M-W-F-- 1-7=MON-SUN 0=ONCE Press the ' # ' key and the display will then return to the Edit Program menu: EDIT PROGRAM

44 Security Mode Event Buttons Pressing the 2 (SEC) key allows you to select the event button that will be activated when a security mode changes:

45 All On/Off Event Buttons Pressing the 4 (ALL) key allows you to specify a event button activated by issuing an All On or an All Off command. You

1 INTRODUCTION Thank you for purchasing your new Aegis 1000 automation system. You are about to experience a new feeling of comfort, convenience, an

46 SELECT BUTTON: WHEN PHONE DEAD ↓ The arrow keys are used to select from a list of event buttons: • WHEN ENERGY LO • WHEN ENERGY MID

47 0=OFF 1=DAY 2=NIGHT 3=AWAY 4=VACATION ↓ 5=DAY INST 6=NIGHT DLY 8=BYPASS 9=RESTORE ↑ Select (0-6) to arm the sys

48 UNIT: ENTER UNIT ↓ Enter the unit number followed by the ' # ' key, or use the arrow keys to select the unit. The un

49 SELECT CONDITION: NEVER × Choose "NEVER" if you wish to temporarily deactivate a program without deleting it. Ot

50 You can issue commands from a local (in-house) phone with Remote Commands Ok set to Yes or No. The default for Remote Commands Ok is Yes. Rings

51 NEVER #=CHNG×

52 For example, if your normal work hours are 8 to 5 Monday through Friday, then set Dial Out 1 On to 8:00 AM MTWTF and Dial Out 1 OFF to 5:00 PM MTWT

53 Audible Exit Delay The Audible Exit Delay is an audible indication from the console beeper while the exit delay is in effect. During the last 10

54 • Any Control functions • Any Temperature Control • View the Event Log • Access the system from a local phone With High Security Mode Off, no co

55 The default setting for X-10 All Off is On. X-10 All On This feature allows you to choose if X-10 or ALC will respond to All On commands. X-1

2 OVERALL DESCRIPTION Console Operation The console is designed with everything that is necessary for you to program and operate your Aegis 1000 aut

56 ZONE NAME 4 ATLANTIC 5 EASTERN 6 CENTRAL 7 MOUNTAIN 8 PACIFIC 9 YUKON 10 ALASKA-HAWAII 11 BERING The value specified for longitude m

57 To change the DST Start or End Weekend, press the ' # ' key, then use the arrow keys to scroll through the list. Press the ' # &apo

58 NUMBER DESCRIPTION 1 First Sunday 2 Second Sunday 3 Third Sunday 4 Fourth Sunday 5 Last Sunday 6 Next to Last Sunday 7 Third from L

59 To enter a voice description, enter the one, two, or three digit code shown in Table 2 in the Appendix C for each description (word or group of wor

60 UNDERWRITER'S LABORATORIES REQUIREMENTS For a complete list of requirements and restrictions when installing the Aegis 1000 panel in a UL Lis

61 FEDERAL COMMUNICATION COMMISSION NOTICE: 1. This equipment complies with Part 68 of FCC Rules. On the door, inside of the Aegis 1000 enclosure, i

62 CANADIAN INDUSTRY CANADA NOTICE Notice: The Industry Canada label identifies certified equipment. This certification means that the equipment mee

63 APPENDIX A - SPECIFICATIONS Size: Controller: 9.1W x 12.1H x 3.5D Console: 4.6W x 4.5H x 1.2D Weight: Controller: approx. 4.5 lb. Console: a

64 APPENDIX B - CHARACTER CODES CODE CHAR CODE CHAR CODE CHAR CODE CHAR 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 SP

65 APPENDIX C - VOICE DESCRIPTIONS CODE DESCRIPTION CODE DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

3 6- DOWN ARROW The Down Arrow key is used to scroll through menus and lists. The down arrow is used to scroll down the list from first to last (for

66 CODE DESCRIPTION CODE DESCRIPTION 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105

67 CODE DESCRIPTION CODE DESCRIPTION 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 17

NOTE TO INSTALLER Following installation, this manual shall be left for the homeowner's use. 800-401

4 Display Menus The system has been designed to be easy to operate. Whenever you press a key on the console, the top line of the display will indica

5 To silence the beeper, press the ' * ' key. For more information, see Trouble Indications. Confirmation Beep When you have successfully